從設計驗證到量產的一站式服務
設計與分析
結構與可列印性分析。
製程規劃
列印參數與支撐結構設計。
塑膠3D列印
SLM 選擇性雷射燒結成型。
後處理
熱處理與表面處理。
品質檢驗
材料與結構性測試。
結構與可列印性分析。
列印參數與支撐結構設計。
SLM 選擇性雷射燒結成型。
熱處理與表面處理。
材料與結構性測試。
我們的任務是,打造尖端科技的量產基地,涵蓋金屬3D列印、複合材料及氫氣瓶、無人機、通訊&導航控制、CNC加工及精密加工設備、實驗室及檢測六大核心能力。
SLM 雷射熔融技術:利用高功率雷射在金屬粉末上產生局部熔融,將金屬粉末加熱到完全熔化並相互結合成型。
纖維複合材料纏繞技術,讓氫氣瓶可以承受儲存所需的高壓條件,這意味著氫能的應用範圍增加,安全性提高,整體效能也得到了提升。
純電垂直起降無人機全機種,能在風速達每小時 40 公里的強風中進行升降與飛行,遇上炎熱和寒冷氣候,都能如常執行任務。
為了低軌道設備所研發出來的通訊與導航控制系統,可以有效且穩定的傳輸訊號,讓高空載體可以順利的執行任務。
廠內設有三軸、五軸 CNC 及其他精密加工設備。
廠內擁有多部實驗及檢測設備,可以提供材料與結構性測試,增加產品的品質可靠度。
Our mission is to build a production base for cutting-edge technology, spanning six core capabilities: metal 3D printing, composite materials & hydrogen tanks, drones, communication & navigation control, CNC & precision machining equipment, and laboratory & testing.
SLM (Selective Laser Melting): uses a high-power laser to locally melt metal powder, heating it to full fusion so particles bond together to form the final shape.
Fiber composite winding technology enables hydrogen tanks to withstand the high-pressure conditions required for storage, expanding the range of hydrogen energy applications while improving safety and overall performance.
Our full range of all-electric VTOL drones can take off, land, and fly in winds up to 40 km/h, and continue to operate normally in both hot and cold climates.
A communication and navigation control system developed for low-orbit equipment, delivering effective and stable signal transmission so high-altitude platforms can complete their missions smoothly.
Our facility is equipped with 3-axis and 5-axis CNC machines along with other precision manufacturing equipment.
Our facility houses multiple testing and inspection instruments, providing materials and structural testing to enhance product quality and reliability.
L-PBF uses a high-power laser to selectively melt metal powder layer by layer. It is suitable for complex geometries, lightweight structures, internal channels, and high-performance metal components.
Common materials include titanium alloys, aluminum alloys, stainless steel, nickel alloys, cobalt-chromium alloys, and other metal powders depending on project requirements.
Yes. Rayvatek can support design review, manufacturability evaluation, topology optimization, support strategy, post-processing planning, and inspection recommendations.
Yes. Depending on the part, post-processing may include stress relief, heat treatment, support removal, CNC machining, polishing, surface treatment, or inspection.
It depends on the geometry, tolerance, material, and application. Metal 3D printing is especially useful when the design is difficult or inefficient to make with CNC alone.
Tolerance depends on material, size, orientation, and post-processing. CNC finishing can be added when tighter functional surfaces are required.
MOQ depends on the project scope, material, part size, and inspection requirements. Please contact Rayvatek with drawings or specifications for evaluation.
雷射粉床熔融,積層製造技術。它利用高能雷射選擇性熔化金屬粉末,逐層堆疊構建零件。
不鏽鋼、鋁合金、鈦合金、鎳合金、銅合金、模具鋼
根據實際印的物件形狀複雜性、大小和材質而異。收到圖檔後,技術團隊才能估算。
可以,我們從前期圖檔設計就能參與,提供您針對積層製造製程的建議。
製作複雜結構是金屬3D列印的優勢,不過還是會有難度和可行性上的考量,仍須由技術部評估。
金屬3D列印印出來的是粗胚 (表面比較粗糙),我們可以配合表面處理或是 CNC 後修。
有圖我們就可以評估列印的難易度,可行性會是評估後判斷。
以 10 立方公分為例,不鏽鋼、鈦合金:+/- 0.05 mm;鋁合金及其他材質:+/- 0.1 mm
比鍛造弱一點,比金屬射出成型(MIM)和鑄造強得多
99.95%
不鏽鋼、鈦合金 0.3 mm; 鋁合金 0.4mm
看是打樣還是量產,打樣沒有 MOQ,一件也可以印。
不好意思,我們沒有販售機台,我們提供工程服務,解決客戶的問題。
依散熱與冷卻應用需求,提供多種金屬材料與高精度製程規格選擇。
緻密度
產品精度
產品薄度
製作尺寸
提示:Rayvatek 技術團隊也可以協助設計產品與圖面建議。
A range of metal materials and high-precision process specifications are available to match heat dissipation and cooling application requirements.
Density
Product Accuracy
Wall Thinness
Build Size
Tip: Rayvatek's technical team can also assist with product design and drawing recommendations.
以台灣為研發與製造核心,串聯日本、澳洲等區域服務與合作據點,支援跨國工程專案、產品部署與在地化技術服務。
研發、製造、測試與專案整合中心。
區域合作、技術交流與應用拓展。
場域服務、應用驗證與海外支援。
Centered on R&D and manufacturing in Taiwan, connected with regional service and partner sites in Japan, Australia, and beyond to support cross-border engineering projects, product deployment, and localized technical services.
R&D, manufacturing, testing, and project integration center.
Regional partnerships, technical exchange, and application expansion.
On-site services, application validation, and overseas support.
ISO 9001 / ISO 27001 / AS 9100




結構與可列印性分析。
列印參數與支撐結構設計。
SLM 雷射熔融成型。
熱處理與表面處理。
材料與結構性測試。
Structural and printability analysis.
Printing parameters and support structure design.
SLM laser powder bed fusion forming.
Heat treatment and surface finishing.
Material and structural testing.